JCM EDUCATION SERVICES
The Excitement is Building!
Cybug QueenAnt Fabrication
You're about to fabricate a electronic-based product, just as a technologist may in a manufacturing company. The quality of your product is directly dependent on the time and care you take with the product assembly!
It's exciting to start, but take your time, and enjoy the creation process and READ THE INSTRUCTIONS. If you have any questions of comments to improve them, please feel free to connect with me with your idea's
I hope you enjoy the build and HAVE FUN!!
-Craig
TOOLS
You will need these tools to assemble your kit:
Needle-nose pliers
Safety Glasses
Quality Soldering Iron
Used toothbrush
(Optional)
Solder Wick
(Optional)
Side-cutters
60/40 Lead-free Solder
99% Isopropyl Alcohol
(Optional)
Helping Hands or Small Vise (Optional)
Damp Sponge
Modified Instructions
QueenAnt Build Instructions
I've made a change to simplify the motor mounts on your Queenant. Please modify your assembly by sticking the motors on the underside of the PCB with the attached adhesive tape. Then connecting the motor terminal with the red dot to the front motor pad, and the other motor terminal to the rear motor pad as shown below...